Article Content
In thermal systems, energy loss occurs not only at the boiler efficiency level but also throughout the distribution and utilization processes.
After heat exchange, steam condenses into high-pressure condensate. When this condensate is discharged and depressurized, a portion of it re-evaporates, forming Flash Steam (secondary steam) due to the sensible heat stored within the condensate. If this flash steam is directly vented to the atmosphere through the vent pipe, businesses not only waste a recoverable source of thermal energy but also incur higher costs for fuel, makeup water, and water treatment chemicals.
So why not recover this energy source for reuse?
HOW IS FLASH STEAM RECOVERED?
In industrial applications, flash steam is efficiently recovered by installing a flash vessel (flash tank) to separate the flash steam from the condensate following pressure reduction. The recovered steam is then routed to low-pressure heat consumers (such as heating tanks, drying equipment, or auxiliary heating systems). Additionally, the remaining heat in the condensate can be harvested via heat exchangers to preheat boiler feedwater or process water.
(Reference Image: Flash steam separation and low-pressure reuse system)
For boiler systems, implementing a High-Pressure Condensate Recovery (HPCR) system helps recover hot condensate while maintaining system pressure, thereby preventing sudden pressure drops that trigger flash steam generation. Consequently, condensate is retained at high temperatures and returned directly to the boiler feedwater system, maximizing residual heat retention, minimizing energy losses, and saving significantly more fuel compared to conventional recovery systems.
(Reference Image: HPCR System)
Si
Recovering both flash steam and residual heat from condensate helps reduce energy losses, lower fuel consumption, decrease make-up water requirements, and reduce water treatment chemical consumption. These measures improve the overall energy efficiency of the entire thermal system.
KEY BENEFITS FOR INDUSTRIAL FACILITIES
-
Maximize energy recovery: Capture thermal energy that would otherwise be wasted through direct steam discharge.
-
Recover valuable condensate: Reuse high-purity condensate and its residual thermal energy.
-
Reduce fuel costs: Decrease the demand for newly generated steam and lower fuel consumption.
-
Optimize system operation: Improve the performance of the entire steam and condensate system.
-
Reduce emissions: Support greener and more sustainable manufacturing operations.
REAL-WORLD PERFORMANCE: CASE STUDY
According to the results recorded from a flash steam recovery project at a food manufacturing plant, with approximately [operating hours/year] of annual operation, the system achieved the following results:
-
Steam savings: [tons of steam/year]
-
Energy recovered: [billion kJ/year]
-
Emission reductions: [tons of CO₂/year]
-
Cost savings: [million VND/year]
-
Payback period (ROI): Approximately 14 months
Note: Actual performance depends on operating conditions, steam and condensate pressures, condensate flow rate, and the plant's steam demand profile.
A MESSAGE FROM PHUC TRUONG HAI (PTH)
Before investing in additional energy sources, businesses can take a practical first step by optimizing the energy resources already available within their existing systems.
Phuc Truong Hai (PTH) is committed to supporting industrial customers with safe, efficient, and cost-effective boiler and thermal system solutions.
Contact the PTH engineering team today to arrange a technical assessment and receive tailored recommendations for optimizing energy recovery at your facility.
Related Articles
12 Aug, 2024
Energy transition – The fight against climate change
30 Oct, 2026
OPERATING ONE LARGE-CAPACITY BOILER OR MULTIPLE SMALLER BOILERS: WHICH OPTION IS MORE COST-EFFECTIVE?
11 Nov, 2026
